UltraFire WF-128 Lithium Battery Rapid Charger for 18650 26650 16340...

UltraFire WF-128 Lithium Battery Rapid Charger for 18650 26650 16340...

Specification of Q128

1. DC input voltage: DC12V 1000mAh, 50-60Hz

2. Charge Current: 2X(4.2V 1000mAh)

                               4X (4.2V 800mAh)

3. Battery Specifications: 18650. 26650. 16340.2AA.3AA etc

4. Termination Method: Auto Voltage Monitor

5. Outline Size: 132.8X90X37mm

6. Weight: 330g

Operation:

1.When charging the switch is located in the :Charge",the red light is flashing,indicate the battery is charging in rapid,when the green light,the charge of all batteries was completed, take out the batteries,shut off the power sourse.

2. When USB output, put two battery into the "USB" battery slot, and the switch put to "USB O/P",USB O/P red light, the USB port output 5V.

3. Adjust the negtive plate to fit on the size of batteries, place charger on the charger.

Caution:

1. This product is designed for Li-ion type batteries only. To avoid personal injury and damage, do not charge any alkaline,zinc chloride or zinc carbon type batteries.

2. Do not use the charger if it has received a sharp blow.been dropped, or damaged in anyhow.

3. To reduce risk of shock,disconnect the power cord from outlet before attempting any cleaning of the charger.

4. Do not charge a leaking,corroded or dead battery.

5. Do not attempt to repair charger by yourself,when service of repair is required, contact qualified service personnal.

6. Do not try to disassemble the charger.

7. Alwarys disconnect the charger from the power supply when not in use.

8. Store the charger in a cool and dry place when not in use.